| TECHNICAL DATA | PREDATOR 3100 |
| WORKING LIGHT mm | 3100/3200/3400 |
| LENGTH mm | 7600 |
| WIDTH mm | 1950 |
| HEIGHT mm | 2100 |
| NET WEIGHT kg | 20150 |
| INSTALLED POWER kw | 38 |
Experience drawn from our Suprema Splitting Machine, Alpespak designed and realized NEW SPLITTING MACHINE PREDATOR
This splitting machine is characterized by a revolutionary new concept (PATENTED) as regards the way to split in LIME.
This system born for the need to solve both the problem of having specialized operators, both to solve the problem of security of the same operators that were exposed to the danger of cutting and crushing as to introduce the hides had to approach the blade.
It has been maintained the system of the articulated roller which acts on the rubber roller and upper transport roller, but the whole was wrapped by special belt sleeves. These special belt sleeves facilitate the hide introduction, and at the same time protect the internal machine parts preserving them from wear and drastically reducing the cleaning time. Moreover the belts have eliminated the problem of marking of the hides caused by transport rollers more or less aggressive, and the lowering of thickness caused by the various trims that was blocking the articulated roller. The belts are always constantly cleaned by an high pressure washing system that acts only at the time of hide for a few seconds in order to avoid unnecessary wastage of water. The other advantage, thanks to the belts introduction system we obtained a 80% less of trimming, in some cases even 100% greatly increasing the quality of the product.
Working speed:
with an average of mt/min You can work 300-400 hides per hour, depending on the type of the same.
Predator makes possible to introduce in automatic hides without operator that normally manually loads the hides as in all traditional splitting machines.
In addition there is the possibility to create a continuous line between fleshing machine and splitting machine itself, avoiding the formation of hides accumulations and eliminating big waste of time.
Installation:
The Predator can be combined with all manufacturers’ machines.
For tanneries that do not have the space or ability to accommodate the automatic line, the semiautomatic option is also available.
All-stainless steel casing supported by sliding guides to allow full opening for easy cleaning, maintenance and blade changing.
Climate-controlled cabinet system with constant temperature, no humidity.
Automatic greasing on more than 40 points of the machine.
Fast bench and head opening with axis adjustments via eccentrics.
Head and bench positioning axes with 120mm diameter ground ball screws.
Solid sharpening units with rapid and hydraulic movements. Motorized for centesimal displacement with automatic washing of grinding wheels.
5-point thickness adjustment with hydraulic pistons and special valves for rapid movements with centesimal accuracy in machining.
Centering of the sleeve with constant hydraulics during processing.
Rapid blade change due to the absence of tractor couplings thanks to a new motorization technology with pressurized rollers.
Hydraulic power unit designed for easy maintenance. Built from components of the best brands in the market.
From the experience gained with the Suprema splitting machine, Alpe Spak designed and built the new Predator splitting machine:
The only splitting machine in the world with a revolutionary new concept in how to split hides in tripe/wb/dry.
The advantages of the Predator splitting machine:
Officine Meccaniche Alpe S.p.a.
Via Seconda Strada, 57
36071 Arzignano, VI, Italy
P.IVA 00871360244
REA VI-180483
Cap. Soc. €516.000,00
Alpe Spak S.r.l
Via Seconda Strada, 43
36071 Arzignano, VI, Italy
P.IVA 02535800243
REA VI-238290
Cap. Soc. €52.000,00
Compila i campi qui sotto, il contenuto sarà inviato al tuo indirizzo mail.
Fill in the fields below and the content will be sent to your email address.
